header photo

How does the Duplex Stainless Steelhelp in making a perfect grade?

Duplex stainless steel is a hardenable and corrosion-resistant alloy. Its microstructure is made up of austenite and ferrite phases. As a result, Duplex 2205 Plate stainless steel and the stainless steel bolts manufacturers in india sheets exhibit austenitic and ferritic steel properties.

When compared to pure austenite and pure ferrite grades, this combination of properties for fasteners manufacturers in India represents a trade-off. Almost always, Super Duplex Plate is stronger than ferritic stainless steel. Duplex stainless steels can be twice as strong as austenitic stainless steel in some cases.

The sheet of Duplex 2205 as well as SS threaded rod manufacturers in India is thought to be resistant to stress corrosion cracking, but it is less resistant than ferritic steel. The less resistant duplex stainless steels, on the other hand, have higher corrosion resistance than the most commonly used stainless steel grades, 304 and 316.

Duplex stainless steels and high tensile fasteners manufacturers in India are also magnetic and have characteristics that distinguish them from common austenitic grades.

The SS hex bolt manufacturers in India creates ASTM A240 / A240M UR52N+ and ASTM A193 Grade B6 is a popular Super Duplex Sheet grade that is high in strength and corrosion resistance. This grade differs from 2205 stainless steel in composition due to the addition of copper. The SS 304 Fasteners manufacturers in India increases resistance to strong reducing acids like hot chloride and sulfuric acid.

There are many more 254 SMO Plates and 316 stainless steel hex bolt manufacturers in india available, the majority of which are proprietary grades developed and manufactured by individual manufacturers of ASTM A193 Grade B7

Duplex stainless steel's corrosion resistance

Duplex 2507 Plate stainless steel is extremely corrosion resistant. They are extremely impervious to intergranular corrosion. Duplex stainless steels are extremely resistant to stress corrosion cracking even in chloride and sulphide environments.

Duplex stainless steel's heat resistance

Duplex stainless steels are more ductile than ferrite and martensite grades at low temperatures. Duplex grades are suitable for temperatures as low as -50°C.

Fabrication of duplex stainless steel

All Duplex Steel Sheet and ASTM A193 B8 Bolts manufacturing should be done with stainless steel-specific tools. Before using tools or working surfaces, thoroughly clean them. These precautions are required to avoid cross-contamination of stainless steel with metals that corrode and tarnish the product's surface.


Machining is possible, but it is difficult due to the high strength of Duplex Steel Plate. For example, 2205 machining or ASTM A320 L7 is approximately 20% slower than 304 machining.

The below mentioned rules will enhance the machining.

The cutting edge should always be sharp. Excessive hardening is caused by dull edges.

The incision should be light but deep enough that the work piece does not harden when mounted on the material's surface.

To keep tips off the jobsite, tip breakers should be used.

Due to the low thermal conductivity of austenitic alloys, heat concentrates on the cutting edge. This implies that you will require refrigerants and lubricants in large quantities.

Welding with duplex stainless steel

Duplex Stainless Steel Sheet is easy to weld. All standard welding processes are applicable. Although welding is more difficult than with austenitic grades, dual-phase grades have lower thermal expansion, which reduces post-weld strain and residual stress.

Go Back


Blog Search


There are currently no blog comments.